Netafim 13mm Aries (High Flow Tiran Dripper) Lilac Dripline

Aries 13mm ID Dripline has high-flow drippers with the widest flow path available on the market today. The wide flow path means that it can operate at lower pressure and that it is less likely to clog. 

Please note this dripperline is not pressure compensating.

Aries ability to work under lower pressure means it can be used in gravity systems and the resistance to clogging means it is ideal for grey water re-use systems.

• Wide filtration area with improved resistance to clogging.
• Wide cross section improves clogging resistance
• Large filtration area ensures optimal performance even under harsh water conditions
• Maximum system pressure: according to driplines wall thickness.
• Recommended filtration: depending on dripper flow rate.
• Filtration method selected based on the kind and concentration of dirt particles contained in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone shall be installed before the main filter. Where sand/silt/clay solids exceed 100 ppm, pre treatment shall be applied following Netafim expert instructions.
• TurbuNext™ labyrinth with superior performance. Weldable into thin wall driplines (0.31, 0.38 mm).
• Injected dripper, very low CV.
• High UV resistant. Resistant to standard nutrients used in agriculture.