AQUASCAPE Aquablox Water Storage Modules Pond Accessories

Each AquaBlox will hold approximately 7.4 gallons of water per cubic foot, allowing over 3 times the water storage capacity than gravel will provide. This extra storage capacity will mean less time needed to top off the reservoir due to evaporation. Using AquaBlox will also decrease the amount of labor, liner, and underlayment required during installation.

The load-bearing top will support up to 5,472 pounds per square foot, providing years of trouble-free enjoyment and allowing for installation in a wide variety of situations. Aquascape AquaBlox are easier to clean, less prone to clogging, and come complete with the top, bottom, two sides and four structural supports.

• Over 3 times more water storage capacity than gravel
• Extra water storage capacity means less time topping off reservoir due to evaporation
• Easier to clean and less prone to clogging than traditional gravel basins
• The ability to hold more water per cubic foot allows for smaller reservoirs
• Less labor required to excavate and move gravel for basin
• Uses less liner and geotextile underlayment than reservoirs constructed with gravel
• Aquablox replace rock and pebble in the Pondless waterfall/stream basin. 
• Come as a flat pack that is easily assembled.
• Also available are double sized units ideal for larger pondless systems or just to increase your water storage area – an underground tank that can be used to irrigate from.

SMALL:

• Dimensions 68.5cm L x 41cm W x 24cm 
• Volume per unit 67 Litres

LARGE:

• Dimensions 68.5cm L x 41cm W x 45cm 
• Volume per unit 126 Litres